Rockstar Time Saver is a water-based sealer specifically formulated for Concrete Pavers, Precast Products, and Natural stone.
- Stops water absorption during grouting and clean up
- Reduces salt transmission, efflorescence, mildew and grout haze
- Durable, fast curing, and non-flammable
- Suits concrete pavers, pre-cast stone products, and natural stone
- Act as a pre-grout release sealer (apply to stone surfaces before grouting).
- Prepare the stone surface for cleaning.
Sweep area to remove dust, building debris i.e plaster, paint, or any contaminant that will inhibit maximum penetration of the sealer. Always test products on a small area first. And allow a 24-hour cure time to determine the ease of application and desired results. One coat of Rockstar Time Saver should be applied with a low-pressure pump or a lambswool applicator. Allow 10 minutes for the product to penetrate the surface then wipe off excess with a clean white dry cloth.
Important: do not allow pre-seal to pool on the surface. The coat coverage rate will vary between 5 and 15m2 depending on the porosity of the material. Allow drying time of around 60 minutes between coats depending on weather and humidity. The surface should be allowed 24 hours to fully cure.